SE-1200MU & HS-1300

HS-1300 Route audio to your Multi-view monitor speakers and headphone jack

HS-1300 Route audio to your Multi-view monitor speakers and headphone jack

HS-1300 Route audio to your Multi-view monitor speakers and headphone jack

Nov 03 2020 | SE-1200MU & HS-1300

To route audio to your multi-view monitor speakers and headphone jack, please do the following:

Please note that you do not need to update your firmware, but it requires reassigning one of the SDI outputs.

 


·         On the switcher section of the keyboard panel, Press Menu, Select Outputs, then change Output SDI 1 from PGM to MultiV.

·         On the monitor section of the angled button panel, you will see MV is lit, press the PGM directly next to it.

·         You will now have audio routed through the multi-viewer. You can adjust the level with the knob on the keyboard panel.


Please let us know if you have any questions.

 

相關產品

產品常見問題

WHAT CAN WE HELP YOU WITH??

Datavideo support is here to help.