VGA Computer Input Jittering on the SE-600, HS-600

SE-600

Nov 03 2020 | SE-600

When I connect a VGA computer signal to the SE-600/HS-600 the image looks jittery or as if it is shaking. How can I correct the problem?

A: The image will become jittery if the refresh rate of your VGA signal is set too high (75 hertz or higher). We recommend setting the refresh rate to 60 hertz.

相關常見問答

SE-600

Adding Logos to SE/HS-600

Q: I am having a hard time loading my logos into t...

VGA Computer Input Jittering on the SE-600, HS-600

When I connect a VGA computer signal to the SE-600...

How To Setup PIP on the SE-600, HS-600

How do I change the background source on the SE-60...

SE-600 Frame Store Guide

SE-600 Frame Store Guide The SE-600 looks for one ...

How to Change the SE-600, HS-600 from NTSC to PAL

Q: How do I change my SE-600 from NTSC to PAL? A: ...

Maximum Resolution of the DVI inputs on the SE-600, HS-600

What is the maximum resolution that DVI inputs on ...

Assigning Outputs to the Optional SDI Output Card on the SE/HS-600

Is it possible to assign any bus (PGM, AUX1, AUX2...

How to update the SE-600 and HS-600 Firmware

How to update the SE-600 and HS-600 Firmware(Ex...