SE-2200 & HS-2200 Series AUX Bus Setup
Nov 03 2020
|
SE-2200 & HS-2200
SE-2200 & HS-2200 Series AUX Bus Setup
- Press and hold the AUX button for the entire process
- On the PGM row, 1-4 will flash
- On the PGM row, press the number of the AUX bus you wish to select
- On the PVW row, 1-6 will flash
- On the PVW row, press the number of the switcher input you wish to assign to the selected bus
-
Let go of the AUX button
- Press the menu button
- Select Video Outputs
- Select from Outputs 1-6, these are the SDI outputs on your switcher
- Assign the AUX bus you just setup to that output
- Confirm your selection and test the output to see if the video routed correctly
You can also re-assign the source for the AUX bus using the above method in the middle of your production as a way to add virtual M/E's to your switcher.
You will not have any mix effects for your AUX bus transitions, they will only cut between sources. But this is a great way to setup an alternate feed for IMAG and still be able to switch sources live independent of your PGM bus.
