MCU-100 & MCU-200

MCU-100P not working with HPX-500

MCU-100P not working with HPX-500

MCU-100P not working with HPX-500

Nov 03 2020 | MCU-100 & MCU-200

MCU-100P not working with AG-HPX500


We found out in some situations, the MCU-100P does not always seem to work flawlessly with Panasonic AG-HPX500 cameras.

From factory MCU-100P and AD-1P adapters are shipped with the latest firmware revision (MCU at 3.2 and AD-1P at 1.4xx). This combination is highly preferred.

Still, we have had reports that some people could not establish a successful connection with a HPX-500. The reason for that is that Panasonic is using different ways for the timer for sync signals in their camera's. Also different camera firmware revisions are a factor.

If you are in the situation of a non working MCU set, try to revert back to revision 1.301, which is most cases solves the issue.

Below you can find a dropbox link for both AD-1P revisions 1.301 and 1.403.
Downgrading can be done safely.

https://www.dropbox.com/sh/02e9ie7abzy57iz/AADPmAypGRsjY7kGzlaTomS0a?dl=0


 

相關常見問答
MCU-100 & MCU-200

WHAT CAN WE HELP YOU WITH??

Datavideo support is here to help.