SE-2200 & HS-2200

SE-2200 & HS-2200 Series AUX Bus Setup

SE-2200 & HS-2200 Series AUX Bus Setup

SE-2200 & HS-2200 Series AUX Bus Setup

Nov 03 2020 | SE-2200 & HS-2200
SE-2200 & HS-2200 Series AUX Bus Setup

 

  • Press and hold the AUX button for the entire process
  • On the PGM row, 1-4 will flash
  • On the PGM row, press the number of the AUX bus you wish to select
  • On the PVW row, 1-6 will flash
  • On the PVW row, press the number of the switcher input you wish to assign to the selected bus
  • Let go of the AUX button
     
  • Press the menu button
  • Select Video Outputs
  • Select from Outputs 1-6, these are the SDI outputs on your switcher
  • Assign the AUX bus you just setup to that output
  • Confirm your selection and test the output to see if the video routed correctly


You can also re-assign the source for the AUX bus using the above method in the middle of your production as a way to add virtual M/E's to your switcher.

You will not have any mix effects for your AUX bus transitions, they will only cut between sources. But this is a great way to setup an alternate feed for IMAG and still be able to switch sources live independent of your PGM bus.

ADDITIONAL
SE-2200 & HS-2200

WHAT CAN WE HELP YOU WITH??

Datavideo support is here to help.