SE-600 Frame Store Guide
Nov 03 2020
|
SE-600
SE-600 Frame Store Guide
The SE-600 looks for one of two files, each one a different image. If you are working in NTSC, your files are as follows:
720480_1.BMP
720480_2.BMP
Simply create a 720x480 image in your graphics software, then export as a 24-bit .BMP file to the main (aka top, root) folder of a SD card.
Then:
-Insert the card in the SE-600
-Press Settings
-Go to option 5, Video In & Out
-Go to option 3, Frame Store
-Select the file you want to copy by pressing the right arrow, then holding the down arrow for two seconds
-Wait for the copy process to complete
-Once you are done copying files, press settings to go up one menu level
-Select option 4, Assign Video Sources
-Select the channel you want to assign the image to, then press the right arrow
-Press the up/down arrows until you arrive at FS-1 or FS-2, you should see your image on the multi-view for that channel
-You can change the channel back to a live input by going back into Assign Video Sources and matching the channel to the input.