As of April 2015, we implemented ethernet based serial control for the SE-2200/HS-2200. If you purchased your SE-2200/HS-220 prior to April 2015, you will need to update your switcher to enable the remote control functionality.
Here is a listing of the necessary documents:
DVIP_Firmware_Upgrade.zip: (DVIP board firmware)
DVIP firmware upgrade procedure.pdf : (Document describes how to upgrade the firmware of DVIP board)
SE-2200 DVIP Serial Protocol V1.0.pdf : (SE-2200 DVIP Serial control protocol document)
Please Note: By default the DVIP is configured to operate at a DHCP mode. User can re-
configure to use fixed IP address
TCP/IP Control port number :
TCP port : 5002
UDP port : 5002
The files have been provided in the links below:
https://www.dropbox.com/s/a59ft4xyzzmb1w8/DVIP_Firmware_Upgrade.zip?dl=0
https://www.dropbox.com/s/4xd47pfpmnx7x57/DVIP%20firmware%20upgrade%20procedure.pdf?dl=0
https://www.dropbox.com/s/3xos41xzu5j7bou/SE-2200%20DVIP%20Serial%20Protocol%20V1.0.pdf?dl=0