SE-2200 Enable DSK for CG-200 Graphics
Nov 03 2020
SE-2200 & HS-2200
Q: How do I enable the graphics layer in the SE-2200 (or HS-2200)? I already connected my laptop via HDMI to the SE-2200 on input #6 but I am only able to see the graphics on the switchers program monitor but it is not layering onto the live video input source.
A: Please check the following settings: 1. Make sure the output of the switcher is set to "Program" 2. Make sure the "DSK PVW" and "DSK PGM" are both set to the line input number on the HDMI input (typically input 6). To confirm the DSK input selection press and hold the "DSK PVW" button on the switchers console and the corresponding selection will flash on the preview bus of the switcher. If the input is not currently set to input 6 then press input 6 while holding the DSK PVW button to select it, then release both buttons.
Réponses aux FAQ sur les produits