TB-5

Using Datavideo Tally with Blackmagic Switchers

Using Datavideo Tally with Blackmagic Switchers

Using Datavideo Tally with Blackmagic Switchers

Nov 03 2020 | TB-5

The Blackmagic Tally box has a 25 pin output and our Datavideo TB-5 tally box has a 15 pin input:
https://www.markertek.com/product/bmd-swtalgp18/blackmagic-swtalgpi8-gpi-and-tally-interface
http://www.datavideo.com/us/Intercom+Systems/TB-5
 
Users would need to make a custom cable (we do not sell this accessory) to connect the two boxes
Alternately, they can connect the boxes to D-Sub breakout boards
 
Attached is the wiring for the TB-5 (same as our SE-500)
The wiring for the Blackmagic Tally is printed on the bottom of the unit.
 
These breakout boards with jumper wires allow you to use standard DB15 and DB25 male to male cables:
DB15 Female Breakout: http://www.gravitech.us/dbfevbrbo.html
DB25 Female Breakout: http://www.gravitech.us/dbfebrbo.html
 
Blackmagic DB25 pins 23, 22, 21, and 20 go to Datavideo DB15 pins 1, 6, 11, and 5 respectively.
An additional wire can go to one of the ground pins on both boards
 
For an additional 4 lights,
Blackmagic DB25 pins 19, 18, 17, and 16 go to a second TB-5 with Datavideo DB15 pins 1, 6, 11, and 5 respectively, plus ground

VERWANDTE PRODUKTE

Antworten auf Produkt-FAQs
ZUSÄTZLICH
TB-5

WHAT CAN WE HELP YOU WITH??

Datavideo support is here to help.