To route audio to your multi-view monitor speakers and headphone jack, please do the following:
Please note that you do not need to update your firmware, but it requires reassigning one of the SDI outputs.
· On the switcher section of the keyboard panel, Press Menu, Select Outputs, then change Output SDI 1 from PGM to MultiV.
· On the monitor section of the angled button panel, you will see MV is lit, press the PGM directly next to it.
· You will now have audio routed through the multi-viewer. You can adjust the level with the knob on the keyboard panel.
Please let us know if you have any questions.
